Connector cleaning kit

Connector cleaning kit

It is necessity to clean connectors,even if the optical fiber connector end face with invisible or small particles, are likely to lead to the light signal is blocked.Or cause reflection to  damage fiber.Even might damage the light source, which causes great damage to the whole communication system.as a result, before use connector,must clean its’ end face.

New type of optical fiber connector cleaning kit  is one of the most popular in optical fiber cleaning tools, its design replacing the traditional clean cotton sticks and alcohol.slightly press can remove blot and oil on connectors head

connector cleaning kits is a kind of using special non-alcoholic material, to clean the SC, FC,ST,LC ect Without alcohol to wipe, then can easily remove dirt, oil and debris.For the convenience of operation, the basic design into a pen shape.
The main list below:
1, 2.5 mm clean pen, clean SC/ST/FC adapter/connector
2, 1.25 mm clean pen, clean LC/MU adapter/connector
(which can clean male,female,PC,APC types all can clean)

Litetime more than 800 times
Antistatic design, ensure that connector is not affected by the dust of the secondary pollution
on the cleaning effect of water and oil is higher than the traditional cotton swabs cleaning rod
In pieces easily clean connector and flange end face and fixed module
Clean connector,adapter ect end face,the kit’s length can adjust,male and female connector or adapter all can clean.
rotate for 180 degrees,which can full clean
After finish clean,warning sound like”kata”
simple and easy to use and carry