Contact Us

Homk Telecom Tech Co.,Ltd

Add:Building 925, Chuangye Park, Li Shan Road, Taoyuan Street, Nanshan District, Shenzhen City

Tel:+86-755-86719651

Fax:+86-755-86719652

Mobile:+8615875522184

E-mail:homk@homk.net

Skype:homk16

Hot Sale Automatic Fiber Heat Stripper For Coating

Hot Sale Automatic Fiber Heat Stripper For Coating

1. 1. This model is mainly stripper for fiber coating,0.9mm indoor fiber cable. 2. This machine used for PLC control system, more precision and speed. 3. Touch screen, very simple to learning, understand and operation. 4. Adopt heat stripping method, not damage fiber, can stripper several pcs together, performance very stable, high precision, adjustable length(10mm-20mm). 5. Every hour stripper quantity between 800pcs-1200pcs. 6. Adopt move forward and back operation method, model 1 and model 2 can used for different stripping length, replace blade convenience.

I.Summary

 

1.     1. This model is mainly stripper for fiber coating,0.9mm indoor fiber cable.

2.     This machine used for PLC control system, more precision and speed.

3.     Touch screen, very simple to learning, understand and operation.

4.     Adopt   heat stripping method, not damage fiber, can stripper several pcs   together, performance very stable, high precision, adjustable   length(10mm-20mm).

5.     Every hour stripper quantity between 800pcs-1200pcs.

6.     Adopt   move forward and back operation method, model 1 and model 2 can used   for different stripping length, replace blade convenience.

 

II. Instructions for user    

 

 

1.    Connect the air inlet to the air source 0.6-0.8MPa

2.    Insert power plug in to 220V 50Hz power socket

3.     Open   the boat shape switch and start working, click “Auto”(“Manual   interface” only need used when replace stripper knife etc. components )

4.     Move cable in to feeding port, start stripping, repeat the actioin can be repeated cable stripping.

5.     Parameter adjustment

5.1 Adjust  the  stripping length of cable: model 1,the stripper length initial  setting  length is 18mm,if need adjust the length, only need revise  parameter of  “upper location”

,  bigger figure mean stripping length longer,  small figure mean stripping  length shorter(Note “upper location 1”  parameter can’t big than “stop  location” parameter). After modified  parameter, click “origin” can be  restored. model 2,the initial setting  length is 15mm, the same can be  modified according to their needs  stripping length(operation step as  model 1).

 

5.2Adjust  the  temperature of heat stripping:  Only need adjust thermostat up and  down key to adjust the heat  stripping temperature. 

6.     Consumable replacement:

Stripper  cleaver  replacement: HK-AS2 uses a special cleaver to stripper the  coating  layer and 0.9mm outside jacket or ribbon fiber, due to long-term  use,  the bland will appear wear(normally working life between 6-12  months),  when blade not sharp, replace stripper cleaver directly(please  connect  with supplier, replace the stripper cleaver need according to   manufacturers guidance).

 

  III.Specification

 

1.     Use air pressure:0.6-0.8MPa

2.     Power:220v 50HZ

3.     Weight:20KG

4.     Volume:350x300x450mm

IV. Maintenance Instructions

 

1.     Pneumatic three-point combination at the air source

2.     Keep clean forever, clean up the waste everyday

3.     Turn off the power and air source after use.

 

V. Standard accessories

1 set Stripper machine,1pcs power cable,1pcs tray

Hot Tags: hot sale automatic fiber heat stripper for coating, China, suppliers, factory, customized, wholesale, quotation, in stock, buy discount, made in China
在线客服