Contact Us

Homk Telecom Tech Co.,Ltd

Add:Building 925, Chuangye Park, Li Shan Road, Taoyuan Street, Nanshan District, Shenzhen City

Tel:+86-755-86719651

Fax:+86-755-86719652

Mobile:+8615875522184

E-mail:homk@homk.net

Skype:homk16

Automatic Fiber Heat Stripper For Jacket Used For PLC Control System

Automatic Fiber Heat Stripper For Jacket Used For PLC Control System

1. This model is mainly stripper for the 2.0mm and 3.0mm indoor fiber cable. 2. This machine used for PLC control system, more precision and speed. 3. Touch screen, very simple to learning, understand and operation. 4. Performance very stable, high precision, adjustable length(25mm-38mm), stripper and cut and cutting very fast.

I.Summary

 

1.     This model is mainly stripper for the 2.0mm and 3.0mm indoor fiber cable.

2.     This machine used for PLC control system, more precision and speed.

3.     Touch screen, very simple to learning, understand and operation.

4.     Performance very stable, high precision, adjustable length(25mm-38mm), stripper and cut and cutting very fast.

5.     Every hour stripper, cut, cutting cable quantity between 1200pcs-1800pcs

6.     Used   insert directly method to replace traditional foot pedal and hand  press  method, not only improve the efficiency, but also save physical   strength.

7.     Adopt   move forward and back operation method, normal indoor 2.0 and 3.0  cable  can used by this machine, no need to replace cleaver.

8.     Double   cleaver set inside, peeling and cut off aramid at the same time, high   precision, stripping quickly, lowing device can remove the aramid   residue automatic.

 

II. Instructions for user 

1.     Connect the air inlet to the air source 0.6-0.8MPa

2.     Insert power plug in to 220V 50Hz power socket

3.     Open the boat shape switch, touch screen will start working, click Auto

4.     Move cable in to feeding port, start stripping, repeat the actioin can be repeated cable stripping.

5.     Parameter adjustment

5.1    Adjust   the stripping length of cable: adjust the “sensor switch” components  of  the two nut to control stripping length, parts move forward mean   stripping length shorten, parts move back mean stripping length longer.

5.2    Adjust   the cutting length of aramid: adjust “below aramid device” in the  lower  right corner of the two nut to adjust the length of aramid  cutting,  device move forward to increase the length of aramind, and  move back to  shorten length of aramid.

5.3    Adjust   the outside jacket opening length: adjust the plastic screw uncover   length which front of “open port” device to adjust outside jacket   opening length, uncover part long mean opening length more shorten,   uncover part short mean opening length more long.

Hot Tags: automatic fiber heat stripper for jacket used for plc control system, China, suppliers, factory, customized, wholesale, quotation, in stock, buy discount, made in China
在线客服