Contact Us

Homk Telecom Tech Co.,Ltd

Add:Building 925, Chuangye Park, Li Shan Road, Taoyuan Street, Nanshan District, Shenzhen City

Tel:+86-755-86719651

Fax:+86-755-86719652

Mobile:+8615875522184

E-mail:homk@homk.net

Skype:homk16

Automated Wind-protector And Tube-heater Fiber Fusion Splicer

Automated Wind-protector And Tube-heater Fiber Fusion Splicer

FSM-80S fusion splicer is core-to-core alignment single fiber splicer succeeding to 60S.In addition to ruggedized concept,which 60S created,the fusion splicer 80S has a series of new features,such as "Automated wind-protector and tube-heater" for quicker splicing cycle as well as fewer operation steps, "innovative carrying-case design" for quicker preparation,"powerful Li-ion battey" for longer operation,high resolution bigger LCD monitor,and "built-in operation manuals" in various languages. Market is from backbone network installation to opto-electronics components production for quality splice.

Chat Now

FSM-80S fusion splicer is core-to-core alignment single fiber splicer succeeding to 60S.In addition to ruggedized concept,which 60S created,the fusion splicer 80S has a series of new features,such as "Automated wind-protector and tube-heater" for quicker splicing cycle as well as fewer operation steps, "innovative carrying-case design" for quicker preparation,"powerful Li-ion battey" for longer operation,high resolution bigger LCD monitor,and "built-in operation manuals" in various languages. Market is from backbone network installation to opto-electronics components production for quality splice.
           
           Fusion splicer FSM-80S Parameter
           
          

 

Applicable fibres

SM (ITU-T G.652 & G.657), MM (ITU-T G.651),DS (ITU-T G.653),
                       NZDS (ITU-T G.655),Others

Fibre Count

Single

Cladding diameter

80 to 150m

Coating diameter

100 to 1000m

Fibre cleaved length

5 to 16mm using Sheath Clamp A, B or 5 to13mm using FH-60-250, FH-60-900

Actual average splice loss

0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS.

Splice time

7sec:SM FAST mode, 12sec :SM AUTO mode, 15sec:AUTO mode

Return loss

60dB or greater

Splicing modes

100 splicer modes are available

Splice loss estimate

Several types of core deformations as well as core axis offset are taken into account for accurate loss estimate.

Attenuation splice function

Intentional high splice loss of 0.1dB to 15dB (0.01dB step) can be made for an
                       inline fixed attenuator

Storage of splice result

The last 2000 results to be stored in the internal memory.

Magnification

X / Y (300X magnification), or both X and Y simultaneously (160X magnification)

Viewing method

By two CMOS cameras for intersecting fiber viewing and 4.73 inches TFT colour LCD monitor

Tension test

1.96 to 2.25N

Operating condition

0-5000m above sea level, 0-95% RH and -10 to 50C respectively.

Tube heater

Built-in auto-start tube heater with 10 heating modes and up to 20 for reference

Tube heat time

13-15sec. with FP-03 protection sleeve. Total memory of 30 heating modes are available

Applicable protection
                       sleeve length

60mm, 40mm and a series of micro sleeves.

No. of splice/heating
                       with battery

200 times of splicing and heat shrinking under with BTR-09

Power supply

Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-18. 14.8Vd.c. with BTR-09

Terminals

USB2.0 ( Mini-B) for data and video signal transfer to PC.

Wind protection

Up to 15m/s wind velocity

Dimensions

146(W) x 159(D) x 150(H) mm

Including wind protector, monitor, and rubber protector

Excluding rubber foot

Weight

2.5 kg, with ADC-18 AC adaptor

2.7 kg, with BTR-09 battery

Electrode life

3000 arc-discharges


Hot Tags: automated wind-protector and tube-heater fiber fusion splicer, China, suppliers, factory, customized, wholesale, quotation, in stock, buy discount, made in China
在线客服